| FT660SC 5 VOLT - Monitored voltage is outside the range 4.5–5.5 V |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC Method of Operation |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC Head Assembly 60161-00 |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC Low (< 1) or negative readings - Instrument head not properly seated on the body. |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC REFERENCE VOLTAGE |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC PMT VOLTAGE PMT |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC OUTPUT MODE NOT NORMAL - Sensor is being calibrated. |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC DATA LOG FULL/ EVENT LOG FULL - Only 30 minutes worth of space remains in the Data Log. |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC LASER I |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC LASER V - Laser voltage is out of the operating range of 4.5 and 5.5 V |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC VOLTAGE IN - Monitored voltage is outside the range of 9.08–14.3 V |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC的技術(shù)參數(shù) |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC TEMPERATURE - Sensor head internal temperature is higher than 50 °C. |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC DARK READING - Dark reading detects too much light (more than 50 mNTU) |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC LOW SIGNAL ERROR - Signal is too low (measuring less than 3.0 mNTU) |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC FLASH FAILURE - Datalog and event log will not work. |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC LASER FAILURE - Laser failed to operate properly and is turned off. |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC A/D FAILURE - A/D conversion failed |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC Verification |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
| FT660SC Calibration |
2018-11-09 |
FilterTrak 660 sc 超低量程濁度儀 |
